admin, July 3rd, 2014. ARCHITECTURE, Floor Safe Installation: Keep Your Safe Secret!.
There must be an important thing that you need to keep secretly in your house. Some kind of safes may only let you to keep it inside your wardrobe or closet probably. But to keep it more secret and secure, you may need to have floor safe installation for sure. But, before you start installing the floor safe, it is highly recommended for you to consult with a reputable and licensed contractor first. Also, you need to consult to the manufacturer in order to get the right instructions for every step.
In this floor safe installation, you will need to prepare the main equipment that involves tape measure, 36” and 6” long level, jack hammer, long handled shovel, tarps, trough and tools for mixing of concrete, trowel, water bucket, and wheel barrel. After that, you can start to decide the location for the floor safe installation. Here, you will need to cut a hole in the basement or the ground floor slab relating to the size of your safe. Ensure that you fill in the bottom of the hole with more the 5 inches of concrete as well, then allow the concrete to dry well.
The next step in floor safe installation is working out bound. You can pour about 1.25” to 1.5” deep of the clean sand into the hole in a square. After that, you can prepare the in-floor safe relating to the manufacturer’s instructions for installation into the hole. In this step, make sure that the dust cover is installed on the safe and lower it into the hole carefully. The last step is about filling the remaining hole with concrete. Ensure that here you do not disturb the safe position. Now, you can allow the concrete to set and dry and well done, you now have an installed floor safe in your house.